Tap Density Tester TD-100Pro

Tap Density Tester TD-100Pro

Put bulk powder into graduated cylinder, measure the volume. Fix cylinder onto the tap assembly. A cam is driven by motor at standardized frequency and height, the cam drives bottom of tap assembly to make cylinder up and down. Powder inside reduces in volume according to its characteristics. Divide mass of sample by tap volume to calculate the tap density of powders.

  1. New generation of operating system, control the operation by 7” LCD touch panel.
  2. Automatic communication check between host and modules and host and accessories. 
  3. Alternative testing mode, tap time or number freely set. 
  4. Tap height selection, being printed on the test report. 
  5. In addition to default frequency, user can freely set any rpm to meet special requirement. 
  6. In addition to SOP tap number, user can freely set any tap number to meet special requirement. 
  7. During test all the set parameters are visible to understand and evaluate working conditions. 
  8. RS-232 connects host and balance, weight data automatically shown on LCD. 
  9. Simply a touch to print reports in very detail. 
  10. Flowability such as Hausner ratio or Compressibility are obtained during measure tap density.
  11. 2 login status eitherAdministor or User, accessed by password, GMP compliance. NEW ! 
  12. Database storages test results. NEW ! 
  13. Only Administor has right to change time or delete records, GMP complicance. NEW !