Fume Hood

LORDERAN Ducted Fume Hood, 4ft/5ft Chemical Fume Hood with Smart Touch Screen Control System for Laboratory

SKU
1200E
Availability
In stock
Questions

Ask about this instrument

LORDERAN Ducted Fume Hood, 4ft/5ft Chemical Fume Hood with Smart Touch Screen Control System for Laboratory

An engineer replies by email or phone, usually within 12 hours.

Power · 110V
Type · 4 ft

A ducted chemical fume hood with smart touch-screen control, in 4 ft and 5 ft widths for one or two operators. Room air is drawn in at the sash and a PP centrifugal fan sends fumes outside, away from the operator, so it needs an exhaust duct to the outside of the building.

LORDERANRUN2300 m³/h
2300 m³/hexhaust volume
0.3–0.8 m/sface velocity
≤ 65 dB(A)noise level
500 mmmax sash opening
3 yearswarranty

Do I need a duct?

Yes. The PP centrifugal fan moves up to 2300 m³/h through your duct to the outside of the building.

Will it fit through my door?

It ships in two crates. The hood crate is the largest: 1360 × 960 × 1910 mm (4 ft) or 1658 × 958 × 1937 mm (5 ft).

How many people can work at it?

One or two operators, on both the 4 ft and the 5 ft model.

110 V or 220 V?

220 V ±10%, 50 Hz is standard; 110 V ±10%, 60 Hz is available. Choose at checkout.

1200E / 1500E Ducted Fume Hood datasheet (5 pages)

Full specifications, airflow and capture, exhaust planning, good practice, installation and warranty in one document to share with your team.
Download datasheet

Specifications

Two widths, same depth and height. Pick 220 V or 110 V.

Differs between models

25509201200 mm

4 ft · 1200E

25509201500 mm

5 ft · 1500E

800 mm deep920 mm worktop1–2 users
Model 4 ft · 1200E 5 ft · 1500E
Size
External (W×D×H) 1200 × 800 × 2550 mm 1500 × 800 × 2550 mm
Internal (W×D×H) 990 × 605 × 900 mm 1290 × 605 × 900 mm
Worktop height 920 mm
Max sash opening 500 mm
Users 1–2
Airflow
Exhaust volume 2300 m³/h
Face velocity 0.3–0.8 m/s
Noise ≤ 65 dB(A)
Fan PP centrifugal fan
Electrical and control
Rated power 300 W 320 W
Power supply 220 V ±10%, 50 Hz (standard)110 V ±10%, 60 Hz (optional)
Control 5-inch LCD touch screen
Lighting LED lamp, 12 W
Construction, weight and crate sizes
Model 4 ft · 1200E 5 ft · 1500E
Construction
Body Cold-rolled steel, electrostatic spray coating
Sash 5 mm tempered glass, counterweight balanced
Worktop One-piece solid phenolic, chemical resistant
Base cabinet Large storage cabinet, electrostatic coating
Weight and shipping
Net weight 181 kg 238 kg
Gross weight, hood 214 kg 276 kg
Gross weight, base stand 102 kg 122 kg
Crate, hood (W×D×H) 1360 × 960 × 1910 mm 1658 × 958 × 1937 mm
Crate, base stand (W×D×H) 1360 × 960 × 1045 mm 1658 × 958 × 1061 mm
Glass sashSash openingup to 500 mmRoom air in0.3–0.8 m/sFumes capturedRear baffleeven sweepPP fan2300 m³/hTo outsideBase cabinetRoom air drawn in at 0.3–0.8 m/sFumes swept to the rear bafflePP fan: up to 2300 m³/hOut through your duct

Fumes go up and out, not toward you

Air enters at the sash, sweeps the worktop to the rear baffle, and leaves through the duct.

  • PP centrifugal fan: high airflow, low noise.
  • Counterweight sash stays at any height.
  • Lower the sash for faster capture.

Blue: room air. Orange: fume-laden exhaust.

Lower the sash, faster capture

The blower moves a set volume of air. Push the same air through a smaller opening and it moves faster, so lowering the sash raises the face velocity and the hood captures fumes more reliably.

front panelSash at 500 mm (fully open)1×Sash at 350 mm1.4× fasterSash at 250 mm2.0× fasterfront panelSash at 500 mm (fully open)1×Sash at 350 mm1.4× fasterSash at 250 mm2.0× faster

Ratios at the same blower setting, calculated from the sash opening. Have the face velocity measured on site after installation.

Everything in its place

Ten details that make daily work safer and easier.

LORDERAN12345678910
  • 1Touch screen5-inch LCD shows running status
  • 2LED lamp12 W, bright and even
  • 3Tempered glass sash5 mm thick, clear wide view
  • 4Counterweight sashStays at any height you set
  • 5Phenolic worktopOne piece, resists chemicals
  • 6Tap, valve and sinkWall-mounted, flow controlled
  • 7Waterproof sockets × 2Power right at the work zone
  • 8Side lifting handlesEasier moving and installing
  • 9Base cabinetLarge storage, coated steel
  • 10Steel bodyCold-rolled, electrostatic coating

Accessories

Four come standard. Add options when you order.

Standard, in the box

LED lamp

12 W over the worktop

Sockets × 2

Waterproof, at the work zone

T/H sensor

Temperature and humidity

Water tap

Tap, valve and lab sink

Optional

HEPA

Filters

Activated carbon, HEPA, chemical

UV lamp

Surface disinfection

Gas tap

Gas tap with valve

Armrests × 2

Padded, for long sessions

Quick answers

Delivery, options, warranty, returns and quotes.

How is it delivered?

Duty paid (DDP) in two crates, hood and base stand. Set the base, lift the hood on with the side handles, connect the duct and power. Freight, duties and taxes are paid to your loading dock; moving the hood inside is not included. Your confirmed ship date is included in the order acknowledgement.

Can I add filters or a UV lamp?

Yes. Activated carbon, HEPA and chemical filters, a UV lamp, a gas tap and armrests are available as options.

What does the warranty cover?

A 3-year worldwide warranty from the date of purchase, covering core components and controls. We repair first; if a major defect can’t be repaired, we replace the unit or give a full refund. Seals, filters and other wear parts are excluded.

Can I return it?

Yes, within 30 days of delivery if unused and in original condition. For non-quality returns the buyer pays return shipping, a 3% restocking fee and the card processing fee. Defective or damaged items are covered in full.

Can I get a formal quote for a purchase order?

Yes. Select your size and options, then click Get a quote for a PDF quotation with DDP shipping included.

Choose width and voltage

The price and PDF quote update with your choices.

Configure yours