LORDERAN Floor Incubator Shaker 0-300 rpm, Temperature Controlled Shaking Incubator for Cell Culture, 24/7 Ultra-Low Noise
- SKU
- 211B-110
- Availability
- In stock
- Questions
A floor-standing incubator shaker built for continuous, around-the-clock culture work. The 211 series holds 186 L or 245 L anywhere from 4 °C to 60 °C to ±0.1 °C, while a single-shaft balanced drive turns an 890 × 480 mm platform from 30 to 300 rpm. Intelligent defrosting keeps it running for long stretches at low temperature.
Heating at 800 W and refrigeration at 200 W with CFC-free 134A coolant, under PID microcomputer control.
211B or 211C?
Same 1250 mm width and 890 × 480 mm plate; the 211C adds 110 mm of chamber height, enough for 5000 ml flasks.
What temperatures?
4 to 60 °C, ±0.1 °C accuracy and ±0.2 °C uniformity, with intelligent defrosting for long runs at low temperature.
Can it run for days?
Yes. The timer runs to 999 h 59 min or continuous, and the run restarts automatically after a power cut.
Which power does it need?
110 V or 220 V. Choose the voltage in the configurator.
211B / 211C Floor Incubator Shaker datasheet
Full specifications, capacity planning, motion and temperature performance, installation requirements and warranty in one document to share with your team.Download datasheetBuilt to run around the clock
Long fermentations and multi-day cultures need a shaker that never drifts and never stops by accident. The 211 series stores its settings, restarts itself after a power cut and defrosts automatically, so a run can go on for days.
Timer from 0 to 999 h 59 min, or continuous
- Intelligent defrosting for long continuous operation at low temperature.
- Rotary speed and parameters are stored, and the run restarts automatically when power returns.
- Single-shaft balanced drive with a maintenance-free brushless motor and soft start.
- Watchdog timer, clock display and parameter encryption keep a running protocol safe.
Speed and orbit set the mixing
How hard the platform pushes your flasks depends on speed and orbit: the peak acceleration grows with the square of the speed and in proportion to the orbit. At 300 rpm a 25 mm orbit reaches about 1.26 g.
Peak acceleration = (2π × rpm / 60)² × orbit radius, in multiples of g (9.81 m/s²). The drawing shows the orbits to scale.
Two heights, one footprint
Both models stand 1250 mm wide and share the same 890 × 480 mm shaking plate. The 211C adds 110 mm of chamber height, enough to take 5000 ml flasks.
| Model | 211B | 211C |
|---|---|---|
| Volume | 186L | 245L |
| Chamber size | 970×550×375 mm | 970×550×485 mm |
| External size | 1250×650×1060 mm | 1250×740×1210 mm |
| Largest flask | 2000 ml | 5000 ml |
| Net weight | 253kg | 265kg |
All other specifications are shared by both models.
Plan your plate
The 890 × 480 mm shaking plate takes flasks from 250 ml to 5000 ml. Each layout shows the maximum load for one flask size.
5000 ml× 6 maximum 211C only
2000 ml× 12 maximum
1000 ml× 18 maximum
500 ml× 28 maximum standard
250 ml× 43 maximum
Standard configuration
Supplied with both models.
Layouts are illustrative and show the maximum number of flasks of one size. 5000 ml flasks fit the 211C only.
Even air, steady temperature
Forced air convection moves heated or cooled air through the whole chamber, so flasks at the edge of the plate see the same conditions as those in the centre.
Temperature range
Cool incubation through warm culture
Control accuracy
PID microcomputer control, with set and actual values on a dual LCD.
Uniformity
Forced convection keeps the whole plate within a tight band.
Protection at every step
Independent alarms watch temperature and speed, and electrical protection guards the unit and your lab. If anything goes out of range, you hear and see it.
Control
- PID microcomputer scanning controller
- Large LCD shows preset and actual working parameters
- Programs with repetition, steps and eight curves
- Timer from 0 to 999 h 59 min, or continuous running
- Temperature and speed calibration, clock display, room and actual temperature display
Protection
- Sound and light alarm when temperature or speed passes its upper or lower limit
- Independent over-temperature protector
- Shaking stops automatically when the door opens
- Independent electric leakage and surge protection
- Run resumes automatically when power is restored
Everyday use
- Ergonomic design with tempered glass window
- Illuminating light or UV light inside the chamber
- Intelligent defrosting for long low-temperature runs
- Soft start prevents samples from splashing
- Maintenance-free brushless motor for long service life
Specifications
Models 211B and 211C, each available in 110 V and 220 V versions. Values that differ between the two models are marked.
Differs between models
| Model | 211B | 211C |
|---|---|---|
| Control and drive | ||
| Control Mode | PID (Microcomputer scans the micro-processing chip) | |
| Display Mode | LCD (Double display of liquid crystal screen) | |
| Circulation Mode | Forced convection | |
| Shaking Mode | Orbital | |
| Drive Mode | Balancing device with single shaft | |
| Programming Function | Programming of repetition, steps and eight curves settings | |
| Timing Range | 0 -999h59mins/continuous | |
| Motor | 120W Inverter motor | |
| Temperature | ||
| Temperature Range | 4°C-60°C | |
| Accuracy of Temperature | ±0.1°C | |
| Temperature Uniformity | ±0.2°C | |
| Coolant | CFC-Free (134A) | |
| Cooler | 200W | |
| Heater | 800W | |
| Shaking | ||
| Speed Range | 30~300rpm | |
| Rotary Accuracy | ±1rpm | |
| Orbit | Dia. 25mm | |
| Size of Shaking Plate | 890×480 mm | |
| Standard Configuration | 500ml×28 | |
| Maximum Capacity | 2000ml×12 or 1000ml×18 or 500ml×28 or 250ml×43 | 5000ml×6 or 2000ml×12 or 1000ml×18 or 500ml×28 or 250ml×43 |
| Safety | ||
| Safety Function | Speed storage, automatic shutdown, temperature and speed correction, monitoring timer, clock display, call recovery, parameter memory, parameter encryption, one-key factory reset | |
| Additional Function | Watchdog timer, independent excess speed sound/light alarm, independent electric leakage, leakage/surge protection device | |
| Dimensions, weight and power | ||
| Volume | 186L | 245L |
| Chamber Size | 970×550×375 mm | 970×550×485 mm |
| External Size | 1250×650×1060 mm | 1250×740×1210 mm |
| Net Weight | 253kg | 265kg |
| Power | 1120W | |
| Power Supply | AC 220V±10%, 50/60 Hz; 110V±10%, 60Hz | |
Questions buyers ask
Warranty, returns, delivery and quotes.
What does the warranty cover?
A 3-year worldwide warranty from the date of purchase, covering core components and controls. We repair first; if a major defect can’t be repaired, we replace the unit or give a full refund. Seals, belts and other wear parts are excluded.
Can I return it?
Yes, within 30 days of delivery if unused and in original condition. For non-quality returns the buyer pays return shipping, a 3% restocking fee and the card processing fee. Defective or damaged items are covered in full.
How is it delivered, and when does it ship?
Freight, duties and taxes are paid to your loading dock; moving the shaker inside is not included. Your confirmed ship date is included in the order acknowledgement.
Can I get a formal quote for a purchase order?
Yes. Select your model and options, then click Get a quote for a PDF quotation with DDP shipping included.
Choose model and voltage
The price and PDF quote update with your choices.












