Search results

A rapid temperature change chamber that drives products from −70 °C to 150 °C at an average 5, 10 or 15 °C per minute, with humidity from 20 to 98 %RH. It...

A heated water bath with a reciprocating shaker built in, for samples that need gentle, even agitation while they incubate. Water carries heat into every flask far faster than air, so the...

This is additional drying and exhaust system for 250L autoclave. Please do not order it separate. Note: Drying system need 7-9 days to prepare. 

A full-size vertical laminar flow hood with a motorized front window and toughened glass on both sides. HEPA-filtered air at 99.995% efficiency at 0.3 μm sweeps down across the work surface at...

A Class II A2 biological safety cabinet that protects three things at once: you, your sample and the lab. Room air is drawn in at the front at 0.53 m/s, ULPA-filtered air...

A compact benchtop clean bench that gives a single user an ISO Class 5 work zone in a 600 mm footprint. Room air passes a washable pre-filter and an H14 HEPA filter,...

Products covered by extended warranty： (-40°C To 150°C) Constant Climate Chamber Environmental Test Chamber (-70°C To 150°C) Constant Climate Chamber Environmental Test Chamber   The warranty terms: The warranty covers all parts...

1. The fume hood is designed with a vertical surface, the operation perspective is wide and more humanized.2. Made of high quality cold rolled steel plate material, with surface electrostatic spraying and...

A ducted fume hood that arrives fully equipped: motorized front window, active carbon filter, two UV lamps, water and gas taps, sink, foot switch and base stand are all standard. A 9-speed...

A benchtop laminar flow cabinet for clean, particle-free compounding and sample preparation. Room air passes a washable pre-filter and a HEPA filter, then flows across the work surface at 0.3–0.5 m/s. The...

An adjustable-speed friability tester for research as well as routine QC. Two synchronised drums run from 20 to 90 rpm, variable or locked, for 10 to 900 rotations, and stop automatically. Manufactured...

A Class II A2 biological safety cabinet that protects three things at once: you, your sample and the lab. Room air is drawn in at the front at 0.53 m/s, ULPA-filtered air...

Silicone Seal Ring for Autoclave is used to seal the 150L, 200L, 250L autoclave  when being used. Good sealing function, water resistance, oil resistance, anti-aging, insulation, cools quickly and easy-to-clean Temperature resistance...

A two-zone thermal shock chamber that moves your test specimen between an independent hot zone and cold zone in 15 seconds or less, again and again. Rapid, repeated swings between as hot...

A horizontal steam sterilizer from 150 to 400 L that uses gravity displacement: steam enters the chamber and pushes the heavier cold air out through the drain. Sterilize at any set point...

A multi-tier open-air orbital shaker that stacks up to six shaking plates in one frame, for up to 450 flasks of 250 ml. A single-shaft balanced drive runs quietly around the clock...

A floor-standing vertical laminar flow clean bench with an ISO Class 5 work zone, an H14 HEPA filter and a 7-inch color touch screen. Three widths from 1100 to 1500 mm suit...

Anti-scorch heating elements.  Suitable for vertical sterilizer autoclave N-X series.  

This is anti-scorch heating tubes (2 pcs) for 100L/150L autoclave.  Suitable for vertical sterilizer autoclave

A complete tablet QC bench in one instrument: hardness, friability, disintegration and dissolution. The PJ-4D runs three dissolution stations and one friability drum; the PJ-6D runs six stations and two drums. A...