Search results

A Class II B2 total-exhaust biological safety cabinet. Nothing is recirculated: room air enters at 0.53 m/s, ULPA-filtered downflow protects the work at 0.33 m/s, and the exhaust leaves the lab through...

The warranty terms: The warranty covers all parts if all conditions are met. Travel costs of the service agent are not included in the warranty. Ongoing consumables (UV light, ULPA/HEPA filters) not...

Silicone Seal Ring for Autoclave is used to seal the autoclave when being used. Good sealing function, water resistance, oil resistance, anti-aging, insulation, cools quickly and easy-to-clean Temperature resistance range from -40℃...

A laboratory autoclave with a programme for every load: solid, liquid, agar melting and a custom mode. Exhaust steam and air are condensed in a built-in bottle, so nothing is vented into...

A horizontal steam sterilizer from 150 to 400 L that uses gravity displacement: steam enters the chamber and pushes the heavier cold air out through the drain. Sterilize at any set point...

Extra shelf for dry cabinet

The warranty terms: The warranty covers all parts within four years of install if all conditions are met. Travel costs of the service agent are not included in the warranty. Ongoing consumables...

2 years extended warranty for Laminar Flow Cabinet

The ULPA Filter is used for Lorderan Class II A2 Biological Safety Cabinet Pro type. (Exhaust filter and supply filter, 1 Each) ULPA exhaust filters size: 1100IIA2-Pro: 800*420*69mm 1300IIA2-Pro: 800*430*69mm 1500IIA2-Pro: 920*420*69mm 1800IIA2-Pro: 1090*420*69mm   ULPA supply...

A Class II A2 biosafety cabinet with a working opening on each long side, so two operators can sit face to face at one 1220 mm stainless work zone. Two ULPA filters...

A complete tablet QC bench in one instrument: hardness, friability, disintegration and dissolution. The PJ-4D runs three dissolution stations and one friability drum; the PJ-6D runs six stations and two drums. A...

A constant climate chamber that holds any temperature from -70 °C to 150 °C and any humidity from 20 to 98 %RH, with ±0.5 °C fluctuation and no condensation inside the chamber....

A compact dissolution tester with one or three vessels, for formulation work and small QC labs. A microprocessor controls temperature, speed and time; a magnetically driven water circulation heats the bath evenly;...

An auto-lifting dissolution tester whose head also turns over by hand, for fast starts and easy cleaning in one design. Three, six or eight stations, ±0.3 °C bath stability, nine preset sampling...

A six-station dissolution tester for routine release and R&D testing, with Chinese Pharmacopoeia 2020 dissolution parameters stored in the controller. The RC-8 adds two rear vessels for pre-warmed replacement media. Basket and...

A single-drum friability tester for uncoated tablets. A curved baffle lifts the tablets and drops them 156 mm on every turn at 25 rpm; after 100 rotations the drum stops by itself,...

-80˚C Cold Trap Temperature. Optional for Freeze Dryer (Available6.0L, 9.0L, 28L). Preparing time: 3days.

A rapid temperature change chamber that drives products from −70 °C to 150 °C at an average 5, 10 or 15 °C per minute, with humidity from 20 to 98 %RH. It...

A ducted fume hood with a manual, height-adjustable glass front window, a built-in PP blower and a phenolic resin worktop. Water tap, sink, sockets and a 4.3 m exhaust duct come as...

The Active Carbon Filter is used for Lorderan Fume Hood. Active carbon filter size (mm) FH700： 650*365*30 FH1000X: 835*495*30FH1200X: 1030*495*30FH1500X: 1335*495*30FH1800X: 1635*495*30 FH1000A: 660*500*30FH1200A: 660*500*30FH1500A: 900*590*30FH1800A: 1200*590*30FH1000P: 735*357*46FH1200P: 735*357*46FH1500P: 735*357*46FH1800P: 735*357*46 (2 pcs...