Search results

A two-zone thermal shock chamber that moves your test specimen between an independent hot zone and cold zone in 15 seconds or less, again and again. Rapid, repeated swings between as hot...

A benchtop open-air orbital shaker with a single-shaft balanced drive that stays quiet and stable through continuous runs. 30 to 300 rpm, a 50 mm orbit on the 300D or 25 mm...

Lorderan Touch Screen Constant-Temperature Incubator is a sophisticated temperature control device that guarantees accurate and reliable results. D type: with inner glass door. G type: with viewing window. Features: LED touch screen....

A ducted fume hood with a motorized front window, a built-in centrifugal blower and a chemical-resistant phenolic resin worktop. Fumes are drawn away from you at 0.3 to 0.8 m/s and sent...

An auto-lifting dissolution tester: the head raises and lowers itself, so starting all stations together is effortless. Six to twelve stations, nine preset sampling points with a beep at each, and ±0.3...

A ducted fume hood with a manual, height-adjustable glass front window, a built-in PP blower and a phenolic resin worktop. Water tap, sink, sockets and a 4.3 m exhaust duct come as...

A constant climate chamber that holds any temperature from -70 °C to 150 °C and any humidity from 20 to 98 %RH, with ±0.5 °C fluctuation and no condensation inside the chamber....

A laboratory autoclave with a programme for every load: solid, liquid, agar melting and a custom mode. Exhaust steam and air are condensed in a built-in bottle, so nothing is vented into...

An adjustable-speed friability tester for research as well as routine QC. Two synchronised drums run from 20 to 90 rpm, variable or locked, for 10 to 900 rotations, and stop automatically. Manufactured...

Printing with F0 value sterilization effect for 250L autoclave. Please do not order it separate. Note: Printing system need 7 days to prepare.

A complete tablet QC bench in one instrument: hardness, friability, disintegration and dissolution. The PJ-4D runs three dissolution stations and one friability drum; the PJ-6D runs six stations and two drums. A...

A 9L laboratory freeze dryer that pre-freezes samples in its own cold trap, so you do not need a separate low-temperature freezer. The cold trap reaches -60 °C or lower (-80 °C...

A 6L laboratory freeze dryer that pre-freezes samples in its own cold trap, so you do not need a separate low-temperature freezer. The cold trap reaches -60 °C or lower (-80 °C...

A heated water bath with a reciprocating shaker built in, for samples that need gentle, even agitation while they incubate. Water carries heat into every flask far faster than air, so the...

A six-station dissolution tester for routine release and R&D testing, with Chinese Pharmacopoeia 2020 dissolution parameters stored in the controller. The RC-8 adds two rear vessels for pre-warmed replacement media. Basket and...

A compact dissolution tester with one or three vessels, for formulation work and small QC labs. A microprocessor controls temperature, speed and time; a magnetically driven water circulation heats the bath evenly;...

A 28L laboratory freeze dryer that pre-freezes samples in its own cold trap, so you do not need a separate low-temperature freezer. The cold trap reaches -60 °C or lower (-80 °C...

Products covered by extended warranty： (-40°C To 150°C) Constant Climate Chamber Environmental Test Chamber (-70°C To 150°C) Constant Climate Chamber Environmental Test Chamber   The warranty terms: The warranty covers all parts...

This is additional drying and exhaust system for 250L autoclave. Please do not order it separate. Note: Drying system need 7-9 days to prepare. 

This is anti-scorch heating tubes (2 pcs) for 100L/150L autoclave.  Suitable for vertical sterilizer autoclave