Compact, Powerful, Reliable
Automatic high-pressure steam sterilization
Full stainless steel 304 structure
Plug & Play Installation
Reliable Performance
Excellent value for money
Easy To Replace Parts
DESIGN
OPERATE
SAFETY
01
Small foot print
LED display
Leakage breaker
02
Bolt structure
up to 134℃
Safety valve
03
Auto-exhaust
Easy setting
Built-in voltage regulator
04
Full SS304
Fully automatic
Anti-dry burning
05
Large load
Built-in cooling fan
Overpressure protection
Limited-time promotion
00
:
Days
00
:
Hours
00
:
Minutes
00
Seconds
Completed
The Critical Equation: Why 150L Autoclave Are Not Supplied for 110/120V Power
Circuit and Breaker Limitations
120V Constraints: Standard residential and light laboratory circuits in North America are typically protected by 15~20A circuit breakers.
Electrical codes (like the US NEC) often require derating the breaker capacity to 80% for continuous running loads (over 3 hours). This means 50A would require a circuit breaker near 70A, which is highly unusual and costly for a single-phase 110V installation.
Wiring and Material Cost
Higher current requires significantly thicker gauge wiring to safely carry the 50A without overheating (typically 4 or 6 AWG wire, depending on factors).
Single-Phase 208V/220V: This is the common laboratory/commercial standard, requiring a much more manageable circuit of around 30A.
Validated Performance and Robust Quality Assurance
Exhaust Mode
Exhaust mode (automatic/non-vent) is instantly selectable via a one-button control.
Provides a sealed environment for applications such as sterilizing liquids (preventing boil-over/rapid depressurization) or for specific research protocols requiring controlled, slow exhaust.
Comprehensive Protection
Over-temperature protection, over-pressure self-venting protection, low water level protection, dry-run protection.
Control System
Simply set the sterilization temperature and duration for fully automatic operation.
Remove complexity and simplify, no threshold for use, dramatically reducing the failure rate.
Heating Elements
Independent audible and visual alarm system for each of the two heating elements for easy troubleshooting and replacement.
Durability
Under strict quality control to meet or exceed industry standards (e.g., EN 285 or ASME standards), assuring its quality and efficacy. The robust design and continuous monitoring systems ensure every cycle achieves a verified Sterility Assurance Level.
Warranty
Two-year warranty to make our users worry-free.
- Choosing a selection results in a full page refresh.
