Products

Lorderan Dynamic climate chambers, temperature range -40°C to 180°C, Humidity range: 20 % to 98 % RH, Intuitive touchscreen controller with time-segment and real-time programming, Troubleshooting system with visual and audible alarms, Cooling with compressor cooling unit, USB port for test data output and print.

Lorderan Dynamic climate chambers, temperature range -70°C to 180°C, Humidity range: 20 % to 98 % RH, Intuitive touchscreen controller with time-segment and real-time programming, Troubleshooting system with visual and audible alarms, Cooling with compressor cooling unit, USB port for test data output and print.

Lorderan CO2 Incubator (Dry heat sterilization ) guarantees reliable, accurate CO2 monitoring with its infrared (IR) CO2 sensor and HEPA-filtered airflow system. Temperature Range: Ambient+5ºC ~65ºC. Air-jacketed, PID Control. 140ºC Dry heat sterilization.

Silicone Seal Ring for Autoclave is used to seal the autoclave when being used. Suitable for vertical sterilizer autoclave 150CA (150L).

Digital display of working status. Auto-letting off the cool air, and steam discharging automatically after sterilization. Over temperature& overpressure auto-protection. Safe protection of water run out. Automatically shut off with beep reminding after sterilization. Comes With 2 stainless steel sterilizing baskets.

2-year warranty. Come with single phase electric power. Automatic cycle sterilization program. Electronic safety interlocking device. Fully stainless-steel structure. Arbitrary setting of temperature 50°C-134°C. Overpressure self-discharge 0.22mpa. With 3 stainless steel sterilizing baskets. Stop automatically after the buzzer reminder.

Single-axis balanced drive technology, Ultra quiet.

Rotary shaking mode.

30~300 rpm shaking speed range.

26mm reciprocating action.

Temperature setting range 4°C~60°C.
250ml*34 or 500ml*24 or 1000ml*15 or 2000ml*8 or 3000ml*6(Flask clamp). Built-in micro printer.

Silicone Seal Ring for Autoclave is used to seal the autoclave when being used. Suitable for vertical sterilizer autoclave 200CA (200L).

2-year warranty. Come with single phase electric power. Automatic cycle sterilization program. Electronic safety interlocking device. Fully stainless-steel structure. Arbitrary setting of temperature 50°C-134°C. Overpressure self-discharge 0.22mpa. With 3 stainless steel sterilizing baskets. Stop automatically after the buzzer reminder.

The Active Carbon Filter is used for Lorderan Fume Hood. (Ship with fume hood together)

Auto-lifting Tablet dissolution tester, with LCD display.

The header move up and down automatically.

The preset and real data could displayed alternately in time, and the timing function could be preset

IQ/OQ documents included free of charge.

It is manufactured in compliance to the USP and EP.

Silicone Seal Ring for Autoclave is used to seal the autoclave when being used. Suitable for vertical sterilizer autoclave.

This is additional drying system for 200L autoclave. Please do not order it separate. Note: Drying system need 7 days to prepare.

Automatic tablet hardness tester

The test data is automatically displayed and locked, and the test data can be reset and cycled.

Integrated thermal printer for YD-2.

50Kg type is optional (2-499.9N).

Hardness testing in compliance with the EP and USP Pharmacopoeia.

IQ/OQ documents included free of charge.

Material: 304 Stainless Steel The basket is used for vertical sterilizer LD, HD, HG type.

Ergonomic design with tempered glass window. Large LCD displays pre-set and actual working parameters. Digital panel is sealed to prevent liquid penetration. Balancing device with single shaft for driving. 4°C to 60°C temperature range. 30~400 rpm shaking speed range. 25 mm orbital action.

Single-axis balanced drive technology, Ultra quiet.

Shaking Speed range from 50~300 rpm.

25/50 mm orbital action.

Timing range 0-999h 59mins/continuous.

3 years warranty. 7 inches large touch screen with Intelligent control system
Motorized front window
Self-locking button switch
Removable handle design

3 years warranty. Class II A2 Biological Safety Cabinet is mainly used for handling pathogenic biological samples or for applications that require a sterile work zone.

Ergonomically-designed raised arm rest helps prevent grille blocking and create a comfortable working posture

Airflow sensor to alert the user if airflow is sufficient for greater safety

Alarm for unsafe sash conditions

Airflow system: 70% air recirculation, 30% air exhaust