LORDERAN Open Air Orbital Shaker, Single-Shaft Balanced Drive Lab Shaker, Quiet Continuous Run, Multi-Flask for Cell Culture
- SKU
- 311D
- Availability
- In stock
- Questions
A floor-standing open-air orbital shaker for flask cultures that run for days: up to 96 flasks of 250 ml on a single-shaft balanced drive that stays quiet and steady at 30 to 300 rpm. Choose a 50 mm or 100 mm orbit and one of two platforms. It has no heating or cooling of its own, so it runs in a temperature-controlled room, warm room or cold room.

D or TD?
D models: 50 mm orbit, up to 300 rpm. TD models: 100 mm orbit, up to 250 rpm, for larger flasks and stronger mixing at lower speed.
311 or 322?
311: 840 × 620 mm platform, up to 58 × 250 ml flasks. 322: 1108 × 740 mm platform, up to 96.
Can it run for days?
Yes. The timer runs to 999 h 59 min or continuously, and the run resumes after a power cut.
Does it heat or cool?
No. Use it in a temperature-controlled room, warm room or cold room.
Open-Air Orbital Shaker 311D / 322D series datasheet (5 pages)
Full specifications, capacity planning, motion and temperature performance, installation requirements and warranty in one document to share with your team.Download datasheetBalance is the beginning of every reliable result
A single-shaft balanced drive counterbalances the moving platform around one precisely machined axis, so vibration is cancelled at its source instead of damped afterwards. Noise stays low and the orbit stays smooth, even fully loaded.
- Key structural parts are cast in high-grade cast iron and ductile iron and finished in one molding pass, for rigidity over long runs.
- A maintenance-free inverter motor gives a wide speed range with high efficiency.
- Low vibration, low noise and long life come from the design, not from adjustment.
Speed and orbit set the mixing
How hard the platform pushes your flasks depends on speed and orbit: the peak acceleration grows with the square of the speed and in proportion to the orbit. At 300 rpm a 50 mm orbit reaches about 2.52 g. A 100 mm orbit gives 2 times the acceleration of a 50 mm one at the same speed, so it mixes and aerates larger flasks without running faster.
Peak acceleration = (2π × rpm / 60)² × orbit radius, in multiples of g (9.81 m/s²). The drawing shows the orbits to scale.
Specifications
Models 311D, 311TD, 322D and 322TD. AC 220 V as standard, 110 V optional.
Differs between models
| Model | 311D | 311TD | 322D | 322TD |
|---|---|---|---|---|
| Motion | ||||
| Shaking Mode | Orbital | |||
| Drive Mode | Single-shaft balanced drive | |||
| Speed Range | 30 – 300 rpm | 30 – 250 rpm | 30 – 300 rpm | 30 – 250 rpm |
| Rotary Accuracy | ±1 rpm | |||
| Orbit Diameter | 50 mm | 100 mm | 50 mm | 100 mm |
| Shaking Platform | 840 × 620 mm | 840 × 620 mm | 1108 × 740 mm | 1108 × 740 mm |
| Control and safety | ||||
| Control Mode | PID, microprocessor with environment scanning | |||
| Display | Touch-screen display | |||
| Program Control | 8 segments of user-programmable programs | |||
| Timing Range | 0 – 999 h 59 min / continuous | |||
| Safety Functions | Automatic run, automatic stop, timed run, clock display, power-failure recovery, parameter memory | |||
| Additional Functions | Monitoring timer, independent over-speed sound/light alarm, independent leakage & surge protection device | |||
| Size, weight and power | ||||
| External Dimensions | 900 × 678 × 380 mm | 900 × 678 × 480 mm | 1210 × 795 × 380 mm | 1210 × 795 × 380 mm |
| Net Weight | 200 kg | 200 kg | 320 kg | 320 kg |
| Power | 170 W | 170 W | 290 W | 290 W |
| Motor | 120 W inverter motor | 120 W inverter motor | 250 W inverter motor | 250 W inverter motor |
| Power Supply | AC 220 V ±10%, 50/60 Hz · AC 110 V ±10%, 60 Hz (optional) | |||
| Material | High-quality ductile iron, channel steel, angle steel, medium plate, cold-rolled steel plate | |||
| Circulation | Natural convection | |||
| Environment | For use in a user-supplied temperature-controlled room or environment | |||
How many flasks?
Maximum Erlenmeyer flasks per platform, one flask size per load. Flask clamps are configured per order; mixed-size layouts are available, so contact us for a custom platform plan.
Two platforms, two orbits
“D” models use a 50 mm orbit up to 300 rpm; “TD” models use a 100 mm orbit up to 250 rpm, for a wider swirl that suits larger flasks and more vigorous mixing at lower speeds.
30–300 rpm. The compact workhorse for routine cell culture and microbial work with small-to-medium flasks.
30–250 rpm. Same footprint with a wider orbit, suited to larger flasks and higher-volume cultures.
30–300 rpm. The high-throughput platform: up to 96 × 250 ml flasks for parallel screening.
30–250 rpm. The largest platform with the wider orbit, built for scale-up and seed-train production.
Built to run for days
Every detail protects your samples, your time and your data.
Drive and mechanics
- Original single-axis balanced drive for ultra-low noise and vibration
- Inverter motor: wide speed range, high efficiency, energy-saving
- Maintenance-free design for long continuous operation
- Key parts in high-quality cast iron and ductile iron
- One-time molding finish for reliable mechanical precision
Control
- Touch screen shows set and measured values side by side
- PID microprocessor controller with environment scanning
- Eight segments of user-programmable running profiles
- Running-parameter memory for repeat protocols
- Parameter encryption and lock
Safety
- Soft-start acceleration protects flasks
- Independent over-speed sound and light alarm
- Power-failure recovery resumes the original program
- Leakage and surge protection device
- Monitoring timer with automatic run and stop
Everything at a single glance
The touch-screen controller shows set parameters and live measurements together, so you can confirm a run is on target without stopping it. Programs are stored, locked and recalled with a touch.

| Control | PID microprocessor, environment scanning |
|---|---|
| Programs | 8 user-programmable segments |
| Timer | 0 – 999 h 59 min, or continuous |
| Alarms | Independent over-speed sound and light alarm |
| Memory | Parameter memory and power-failure recovery |
More LORDERAN shakers
Open-air shakers for any room, and incubator shakers when you need temperature control.
Questions buyers ask
Power, warranty, returns, delivery and quotes.
Which power does it need?
AC 220 V ±10%, 50/60 Hz as standard. AC 110 V ±10%, 60 Hz is optional; tell us before you order.
What does the warranty cover?
A 3-year worldwide warranty from the date of purchase, covering core components and controls. We repair first; if a major defect can’t be repaired, we replace the unit or give a full refund. Seals, belts and other wear parts are excluded.
Can I return it?
Yes, within 30 days of delivery if unused and in original condition. For non-quality returns the buyer pays return shipping, a 3% restocking fee and the card processing fee. Defective or damaged items are covered in full.
How is it delivered, and when does it ship?
Freight, duties and taxes are paid to your loading dock; moving the shaker inside is not included. Your confirmed ship date is included in the order acknowledgement.
Can I get a formal quote for a purchase order?
Yes. Select your size and options, then click Get a quote for a PDF quotation with DDP shipping included.
Choose your model
The price and PDF quote update with your choices.












